Ferrite characterization techniques & particle simulations for semiconductor devices

This dissertation is divided into three papers, covering two major topics. The first topic, techniques for ferrite characterization, is discussed over the course of two papers. The second topic, particle simulations for semiconductor devices, is discussed in the last paper. In the first paper, the method for extracting permeability from ferrite materials is discussed for the Keysight 16454A permeability extraction fixture, where the ferrite material to be characterized is assumed to be homogeneous. Then the method is updated to account for layered materials. The updated method is verified through full-wave simulations. In the second paper, a planar printed circuit board (PCB) coil is proposed as an alternative to the Keysight 16454A fixture for extracting permeability from ferrite materials. The method of extraction is verified through full-wave simulations. The final paper (and second topic) develops a particle simulator, based on the Boltzmann transport equation (BTE) and Monte Carlo (MC) methods, for studying semiconductor devices with submicron feature sizes. Particle simulations are advantageous because full-wave simulators based purely on Maxwell\u27s equations are not able to capture certain semiconductor effects. This work specifically investigates metal-oxide-semiconductor (MOS) effects for a pair of through-silicon-vias (TSVs), and the corresponding accumulation and depletion regions formed for different bias voltages --Abstract, page iv

An evaluation of de-embedding techniques for TSVs

One of the most important aspects of modern electronic designs is device measurement and characterization. Without device measurement and characterization, the functionality of end designs cannot be guaranteed. At the silicon level (on-wafer), extracting the electrical performance of devices and structures has grown increasingly more complex with the continual shrink of feature sizes. Compared to the overall measurement setup (VNA, cables, probes, interposers, etc.), the ultra small size of on-wafer structures leads to their electrical performance being easily overshadowed by other, larger fixtures. Thus, many scientists and engineers have worked to devise ever more accurate calibration and de-embedding techniques for measurement setups. This thesis explores current state-of-the-art de-embedding techniques for both silicon transmission lines and general devices under test (DUTs). A complete evaluation is performed on several techniques, leading to a best choice selection for use in de-embedding through-silicon-vias (TSVs). During the evaluation a more intuitive approach (utilizing scattering parameters) is taken to verify the accuracy of the various de-embedding techniques. Attempts at formulating new de-embedding techniques are also explored --Abstract, page iii

Nanoscale records of ancient shock deformation: Reidite (ZrSiO4) in sandstone at the Ordovician Rock Elm impact crater

The terrestrial record of meteorite impacts is difficult to decipher because unequivocal evidence of impact is increasingly destroyed with time by erosion, burial, and tectonics. Zircon survives these processes as a shocked mineral, and above 20 GPa transforms to reidite, a high-pressure ZrSiO4 polymorph diagnostic of impact. However, the utility of reidite has been limited by its occurrence; it has only been reported from three relatively young (<36 Ma) impact craters globally. Here we report a new occurrence of reidite in brecciated sandstone from the Ordovician Rock Elm impact crater in Wisconsin, United States. Electron backscatter diffraction mapping was used to identify reidite and microtwins within shocked zircons smaller than 50 µm in diameter. Reidite occurs both as 200–500-nm-wide lamellar intergrowths and as nanoparticulate grains, and not only provides the first diagnostic evidence for ultrahigh-pressure shock metamorphism at Rock Elm, but is also the oldest reported occurrence of reidite. Considering its small size, and the ubiquitous presence of detrital zircon in siliciclastic rocks, reidite may be more common in the rock record than has been reported but has potentially gone undetected. The recognition that nanoscale reidite can be preserved over deep time within zircon in shock-metamorphosed sandstone presents new opportunities for investigating Earth’s impact record, as it could potentially preserve nanoscopic evidence of impact events much older than the one that formed Rock Elm. Given that shocked zircons have been shown to survive sedimentary cycling, the identification of reidite within zircons in siliciclastic rocks could facilitate investigating the impact chronology over much of the geological time scale, as the oldest terrestrial minerals known are detrital zircons

Automated Bench-Scale Bioreactor

The objective of this project was to design and build an automated bench-scale sequencing batch reactor to demonstrate the treatment of wastewater using an activated sludge process. LabVIEW 8.0 development software was used to build a user interface to control timing sequence, pumping, aeration, and temperature of the physical reactor setup

Shocked Quartz in Polymict Impact Breccia from the Upper Cretaceous Yallalie Impact Structure in Western Australia

Yallalie is a ~12 km diameter circular structure located ~200 km north of Perth, Australia. Previous studies have proposed that the buried structure is a complex impact crater based on geophysical data. Allochthonous breccia exposed near the structure has previously been interpreted as proximal impact ejecta; however, no diagnostic indicators of shock metamorphism have been found. Here we report multiple (27) shocked quartz grains containing planar fractures (PFs) and planar deformation features (PDFs) in the breccia. The PFs occur in up to five sets per grain, while the PDFs occur in up to four sets per grain. Universal stage measurements of all 27 shocked quartz grains confirms that the planar microstructures occur in known crystallographic orientations in quartz corresponding to shock compression from 5 to 20 GPa. Proximity to the buried structure (~4 km) and occurrence of shocked quartz indicates that the breccia represents either primary or reworked ejecta. Ejecta distribution simulated using iSALE hydrocode predicts the same distribution of shock levels at the site as those found in the breccia, which supports a primary ejecta interpretation, although local reworking cannot be excluded. The Yallalie impact event is stratigraphically constrained to have occurred in the interval from 89.8 to 83.6 Ma based on the occurrence of Coniacian clasts in the breccia and undisturbed overlying Santonian to Campanian sedimentary rocks. Yallalie is thus the first confirmed Upper Cretaceous impact structure in Australia

Characterization of Power Induced Heating and Damage in Fiber Optic Probes for Near-Field Scanning Optical Microscopy

Tip-induced sample heating in near-field scanning optical microscopy (NSOM) is studied for fiber optic probes fabricated using the chemical etching technique. To characterize sample heating from etched NSOM probes, the spectra of a thermochromic polymer sample are measured as a function of probe output power, as was previously reported for pulled NSOM probes. The results reveal that sample heating increases rapidly to ~55–60°C as output powers reach ~50 nW. At higher output powers, the sample heating remains approximately constant up to the maximum power studied of ~450 nW. The sample heating profiles measured for etched NSOM probes are consistent with those previously measured for NSOM probes fabricated using the pulling method. At high powers, both pulled and etched NSOM probes fail as the aluminum coating is damaged. For probes fabricated in our laboratory we find failure occurring at input powers of 3.4 ± 1.7 and 20.7 ± 6.9 mW for pulled and etched probes, respectively. The larger half-cone angle for etched probes (∼15° for etched and ~6° for pulled probes) enables more light delivery and also apparently leads to a different failure mechanism. For pulled NSOM probes, high resolution images of NSOM probes as power is increased reveal the development of stress fractures in the coating at a taper diameter of ~6μm. These stress fractures, arising from the differential heating expansion of the dielectric and the metal coating, eventually lead to coating removal and probe failure. For etched tips, the absence of clear stress fractures and the pooled morphology of the damaged aluminum coating following failure suggest that thermal damage may cause coating failure, although other mechanisms cannot be ruled out

Characterization of power induced heating and damage in fiber optic probes for near-field scanning optical microscopy

This is the published version, also available here: http://dx.doi.org/10.1063/1.2740133.Tip-induced sample heating in near-field scanning optical microscopy (NSOM) is studied for fiber optic probes fabricated using the chemical etching technique. To characterize sample heating from etched NSOM probes, the spectra of a thermochromic polymer sample are measured as a function of probe output power, as was previously reported for pulled NSOM probes. The results reveal that sample heating increases rapidly to ∼55–60°C as output powers reach ∼50nW. At higher output powers, the sample heating remains approximately constant up to the maximum power studied of ∼450nW. The sample heating profiles measured for etched NSOM probes are consistent with those previously measured for NSOM probes fabricated using the pulling method. At high powers, both pulled and etched NSOM probes fail as the aluminumcoating is damaged. For probes fabricated in our laboratory we find failure occurring at input powers of 3.4±1.7 and 20.7±6.9mW for pulled and etched probes, respectively. The larger half-cone angle for etched probes (∼15° for etched and ∼6° for pulled probes) enables more light delivery and also apparently leads to a different failure mechanism. For pulled NSOM probes, high resolution images of NSOM probes as power is increased reveal the development of stress fractures in the coating at a taper diameter of ∼6μm. These stress fractures, arising from the differential heating expansion of the dielectric and the metalcoating, eventually lead to coating removal and probe failure. For etched tips, the absence of clear stress fractures and the pooled morphology of the damaged aluminumcoating following failure suggest that thermal damage may cause coating failure, although other mechanisms cannot be ruled out

Effects of diet on resource utilization by a model human gut microbiota containing Bacteroides cellulosilyticus WH2, a symbiont with an extensive glycobiome

The human gut microbiota is an important metabolic organ, yet little is known about how its individual species interact, establish dominant positions, and respond to changes in environmental factors such as diet. In this study, gnotobiotic mice were colonized with an artificial microbiota comprising 12 sequenced human gut bacterial species and fed oscillating diets of disparate composition. Rapid, reproducible, and reversible changes in the structure of this assemblage were observed. Time-series microbial RNA-Seq analyses revealed staggered functional responses to diet shifts throughout the assemblage that were heavily focused on carbohydrate and amino acid metabolism. High-resolution shotgun metaproteomics confirmed many of these responses at a protein level. One member, Bacteroides cellulosilyticus WH2, proved exceptionally fit regardless of diet. Its genome encoded more carbohydrate active enzymes than any previously sequenced member of the Bacteroidetes. Transcriptional profiling indicated that B. cellulosilyticus WH2 is an adaptive forager that tailors its versatile carbohydrate utilization strategy to available dietary polysaccharides, with a strong emphasis on plant-derived xylans abundant in dietary staples like cereal grains. Two highly expressed, diet-specific polysaccharide utilization loci (PULs) in B. cellulosilyticus WH2 were identified, one with characteristics of xylan utilization systems. Introduction of a B. cellulosilyticus WH2 library comprising >90,000 isogenic transposon mutants into gnotobiotic mice, along with the other artificial community members, confirmed that these loci represent critical diet-specific fitness determinants. Carbohydrates that trigger dramatic increases in expression of these two loci and many of the organism's 111 other predicted PULs were identified by RNA-Seq during in vitro growth on 31 distinct carbohydrate substrates, allowing us to better interpret in vivo RNA-Seq and proteomics data. These results offer insight into how gut microbes adapt to dietary perturbations at both a community level and from the perspective of a well-adapted symbiont with exceptional saccharolytic capabilities, and illustrate the value of artificial communities